launchxl-凯发k8国际官网首页入口

smartrf™ studio is a windows application that can be used to evaluate and configure low power rf devices from texas instruments. the application helps designers of rf systems to easily evaluate the radio at an early stage in the design process. it is especially useful for generation of configuration register values and commands, and for practical testing and debugging of the rf system. smartrf studio can be used either as a standalone application or together with applicable evaluation boards or debug probes for the rf device.

the simplelink™ low power f2 software development kit (sdk), formerly known as the cc13xx and cc26xx sdk, delivers components that enable engineers to develop applications on the texas instruments simplelink cc13xx and cc26xx family of wireless microcontrollers (mcus). this software toolkit provides a cohesive and consistent software experience for all simplelink cc13xx and cc26xx wireless mcu users by packaging essential software components, such as a bluetooth® low energy (ble) protocol stack supporting bluetooth 5.2, zigbee 3.0 compliant protocol suite, rf-proprietary examples, ti's 15.4 stack, ti wi-sun fan stack, amazon sidewalk examples, as well as the ti-rtos7 kernel and ti drivers in one easy-to-use software package along with example applications and documentation. in addition, the dynamic multi-protocol manager (dmm) software component enables multiprotocol development on a single simplelink wireless mcu.

although not included in the sdk, simplelink cc13xx and cc26xx wireless mcus are also capable of supporting the following wireless solutions: please refer to their respective repositories for resources and more information.

• the matter standard: https://github.com/texasinstruments/matter
• thread 1.1.1 networking stack based on openthread: (https://github.com/texasinstruments/ot-ti)

the simplelink mcu portfolio offers a single development environment that delivers flexible hardware, software, and tool options for customers developing wired and wireless applications. with 100 percent code reuse across host mcus, wi-fi™, bluetooth low energy, sub-1ghz devices and more, choose the mcu or connectivity standard that fits your design. a one-time investment with the simplelink software development kit allows you to reuse often, opening the door to create unlimited applications. for more information, visit www.ti.com/simplelink.

this sdk is also available on github at https://github.com/texasinstruments/simplelink-lowpower-f2-sdk

sensor controller studio is used to write, test and debug code for the cc26xx/cc13xx sensor controller, allowing for ultra-low power application design.

the tool generates a sensor controller interface driver, which is a set of c source files to be compiled into the system cpu (arm cortex-m3/m4) application. these source files contain the sensor controller firmware image and associated definitions, and generic functions that allow the system cpu application to control the sensor controller and exchange data.

the sensor controller is a small cpu core that is highly optimized for low power consumption and efficient peripheral operation. the sensor controller is located in the cc26xx/cc13xx auxiliary (aux) power/clock domain, and can perform simple background tasks autonomously and independently of the system cpu and the mcu domain power state. such tasks include but are not limited to:

• analog sensor polling, using adc or comparator
• digital sensor polling, using spi, i2c or other protocols
• capacitive sensing, using current source, comparator and time-to-digital converter (tdc)
• waveform generation, for example for lcds

the sensor controller is user programmable, using a simple programming language with syntax similar to c. this allows for sensor polling and other tasks to be specified as sequential algorithms, rather than static configuration of complex peripheral modules, timers, dma, register programmable state machines, event routing and so on. the main advantages are:

• flexibility
• dynamic reuse of hardware resources
• ability to perform simple data processing without need for dedicated hardware
• observability and debugging options

the code composer studio™ ide is a complete integrated suite that enables developers to create and debug applications of all texas instruments embedded processors (sitara, dsp, automotive, keystone), microcontrollers (simplelink™, c2000 digital control, msp430, tm4c, hercules), as well as digital power (ucd) and programmable gain amplifier (pga) devices.

• : this release will be available as an update to ccs 12.0.0, 12.1.0, 12.2.0, 12.3.0, 12.4.0, 12.5.0, 12.6.0, 12.7.0
• windows 32bit is not supported with ccsv12. if you are using a 32bit windows system please use or earlier.
• xds510 class debug probes are not supported with ccsv12. support for xds510 class probes was deprecated years ago for linux and macos. if you need to use one of these older probes please use or earlier.

uniflash is a standalone tool used to program on-chip and external flash memory on ti mcus and on-board flash memory for sitara processors. uniflash has a gui, command line, and scripting interface. uniflash is available free of charge.

the simplelink™ low power f2 software development kit (sdk), formerly known as the cc13xx and cc26xx sdk, delivers components that enable engineers to develop applications on the texas instruments simplelink cc13xx and cc26xx family of wireless microcontrollers (mcus). this software toolkit provides a cohesive and consistent software experience for all simplelink cc13xx and cc26xx wireless mcu users by packaging essential software components, such as a bluetooth® low energy (ble) protocol stack supporting bluetooth 5.2, zigbee 3.0 compliant protocol suite, rf-proprietary examples, ti's 15.4 stack, ti wi-sun fan stack, amazon sidewalk examples, as well as the ti-rtos7 kernel and ti drivers in one easy-to-use software package along with example applications and documentation. in addition, the dynamic multi-protocol manager (dmm) software component enables multiprotocol development on a single simplelink wireless mcu.

although not included in the sdk, simplelink cc13xx and cc26xx wireless mcus are also capable of supporting the following wireless solutions: please refer to their respective repositories for resources and more information.

• the matter standard: https://github.com/texasinstruments/matter
• thread 1.1.1 networking stack based on openthread: (https://github.com/texasinstruments/ot-ti)

the simplelink mcu portfolio offers a single development environment that delivers flexible hardware, software, and tool options for customers developing wired and wireless applications. with 100 percent code reuse across host mcus, wi-fi™, bluetooth low energy, sub-1ghz devices and more, choose the mcu or connectivity standard that fits your design. a one-time investment with the simplelink software development kit allows you to reuse often, opening the door to create unlimited applications. for more information, visit www.ti.com/simplelink.

this sdk is also available on github at https://github.com/texasinstruments/simplelink-lowpower-f2-sdk